Start with what Version 09 actually is
Version 09 Case Study Playing Cards is a 54-card deck: 52 regulation playing cards, 2 jokers and 2 info cards, each measuring 3.5 x 2.5 inches. The deck is printed in China on Japanese paper, then pressed and finished to Dan and Dave's exact specifications. That makes it a usable deck for magic, cardistry and games with cards, not just a display piece.
The deck is available in two types: Standard and Artist Proof. The supplied record does not explain how those two differ beyond the name, so treat the Artist Proof as a distinct buying choice rather than assuming it handles differently. If handling is your main concern, the Standard deck is the straightforward option to break in and use.
Deck facts that shape your handling routine
- Version 09: 52 regulation playing cards, 2 jokers, and 2 info cards measuring 3.5 x 2.5 inches. The 3.5 x 2.5 inch size is the familiar poker-card format, so standard fans, shuffles and spreads apply. The two info cards are reference cards, not extra playing cards, so keep them separate if you want a clean 52-card deck for games.

Version 09 - Version 09: Printed in China on Japanese paper, pressed and finished to Dan and Dave's exact specifications. The paper and finish are the parts you are breaking in. A freshly opened deck can feel stiff or slick, and the routine below is about working the cards gradually rather than forcing them.
- Version 09: Ideal for magic, cardistry, and games with cards. Version 09 is intended for active use across three different activities. That means your break-in and care habits should support regular handling, not just occasional display.
A simple break-in routine for Version 09
The supplied record does not include a manufacturer break-in procedure, so the steps below are general handling habits rather than official instructions. The goal is to loosen the deck evenly before you push it into fast fans or hard shuffles.
- Open and separate the info cards: Remove the two info cards and set them aside. This leaves you with the 52 regulation cards plus the two jokers, which is the working deck you will break in.
- Start with gentle overhand shuffles: Shuffle the full deck slowly several times. This works the cards against each other and begins to loosen the press without bending any single card sharply.
- Do a few loose riffle shuffles: Riffle shuffles help even out the deck. Keep the pressure light at first and avoid forcing the cards to interlock if they feel stiff.
- Spread the deck on a clean surface: A slow ribbon spread on a clean, dry table lets you see how the cards fan and whether any are sticking. Repeat until the spread feels more even.
- Practice fans in both hands: Fan the deck in each hand so both edges get worked. If the cards clump, return to shuffles and spreads rather than applying more pressure.
- Add magic and cardistry only when the deck feels settled: Once the deck fans evenly and shuffles without catching, move on to the magic and cardistry work the deck is intended for.
Fanning tips for a freshly opened deck
Fanning is where a new deck shows its condition most clearly. If the cards clump or refuse to spread evenly, the deck is usually still working through its factory press rather than being defective. Go back to slow shuffles and spreads, and keep your hands clean and dry.
Avoid fanning on rough or dirty surfaces, and do not leave a fanned deck sitting out for long periods. The supplied record does not state a specific humidity or temperature range, so use ordinary good sense: keep the deck away from damp surfaces and direct heat.
Care habits that keep Version 09 playing well
Version 09 is built for regular use, so care is mostly about consistency rather than special treatment.
- Keep the info cards with the deck: The two info cards are part of the supplied contents. Storing them with the deck keeps the set complete if you later pass it on or display it.
- Store the deck in its box: Return the cards to the box after use to keep dust off the edges and to hold the deck's shape between sessions.
- Keep hands clean and dry: Moisture and oils from your hands are the most common cause of clumping. Wash and dry your hands before long handling sessions.
- Rotate decks if you use several: If you own other Case Study versions, rotating between them spreads the wear and gives each deck time to rest in its box.
- Check the edges periodically: Look along the deck's edges for nicks or rough spots. Catching them early lets you set the deck aside before the damage spreads.
Standard vs Artist Proof: which one to break in
The supplied record lists two types, Standard and Artist Proof, but does not describe how they differ beyond the name. That makes this a buying decision rather than a handling one.
- Standard: The practical choice if your main goal is to open the deck, break it in and use it for magic, cardistry and games.
- Artist Proof: A distinct type in the record. The supplied information does not confirm any handling or content difference, so choose it on the basis of the name and your collecting interest rather than an assumed performance benefit.
What the supplied record does not settle
The record confirms the card count, dimensions, printing location, paper type and intended uses, but it does not include a manufacturer break-in procedure, a care schedule, or a stated difference between the Standard and Artist Proof types. It also does not state a recommended storage temperature or humidity range.
Treat the routine above as general handling guidance rather than a Dan and Dave instruction. If you are buying Version 09 primarily as a collectible, the break-in steps still apply if you plan to open it, but the Artist Proof question is one to settle with the store before ordering.


